|
As nationally-recognized
leaders in the sustainable landscaping movement, we are at
the forefront of pro-active change. We constantly strive to
reduce the negative environmental impacts of our work and
to be sure our actions are consistent with our philosophy.
Wherever it is practical to do so, the following standards
will be applied to your project unless you wish us to do otherwise.
We realize that although landscaping has many positive benefits,
there are still unavoidable negative consequences. We will
make every effort to reduce those, now and in the future.
Here are the standards we hold our workers and subcontractors
to. Please look them over. We welcome any suggestions for
improvements. Thank you.
SECTION
A: MATERIALS
WOOD PRODUCTS
Use certified sustainably harvested lumber and wood products
exclusively when they are available. Provide a copy of the
certification for all materials delivered to the site. Advise
if certified materials will not be used for part or all of
the project. Suggest alternatives such as recycled plastic
lumber, salvaged lumber or wood harvested from urban trees.
STONE PRODUCTS
Do not harvest materials from intact natural ecosystems. Obtain
boulders and paving stone from responsible sources. Protect
watersheds and streams when harvesting materials.
IMPORTED SOIL
Do not obtain soil from natural areas. To the degree possible,
ensure that suppliers protect against erosion and other environmental
damage in the course of their operations, and that the product
is free of toxins and non-degradable rubbish.
FERTILIZERS
All fertilizers must be made from 100% non-chemical sources,
i.e. "organic" fertilizers. Pre-approved brands
include Gro-Power, Dr. Earth, Whitney Farms. Others are acceptable
if authorized prior to bidding. Read labels carefully to be
sure of content.
PESTICIDES
No pesticides shall be used on any project without prior authorization.
HERBICIDES
Minimize the use of Roundup herbicide. The reason for this
is the predatory business practices of the manufacturer, Monsanto
Corporation, and unanswered questions about the safety of
the product. Where practicable, use alternative methods of
weed control such as hand weeding, grubbing, mulching, or
alternative herbicides. Inquire prior to bidding about specific
weed control specifications for each project.
AMENDMENTS
AND OTHER ORGANIC MATERIALS
Purchase organic materials from responsible sources. Do not
use materials that are contaminated with noticeable quantities
of non-degradable rubbish, detectable chemicals, etc.
PLANTS
To the degree possible, obtain plants from nurseries that
practice integrated pest management and protect air, soil
and watersheds from pollution. Do not dig plants from the
wild or purchase wild-harvested plant materials.
SECTION
B: PRACTICES
REFUSE DISPOSAL
Dispose of all refuse in an approved facility. Recycle all
greenwaste, broken concrete, asphalt and wood products in
an approved manner. Reuse materials such as drip tubing, lumber
cutoffs, etc. whenever possible. Where applicable, leave chipped
organic material on site to be used as mulch.
SLOPES
When working on slopes, take whatever precautions are necessary
to prevent erosion and siltation of waterways. These may include
appropriate grading practices, use of erosion control fabrics,
soil binding agents, approved cover crops, drainage systems,
silt fences, and other practices agreed upon in advance of
bidding.
WATERWAYS
Protect all streams and creeks from damage. Do not allow employees
to use streams as bathrooms. Always provide portable toilets
where other facilities are not available.
EXISTING VEGETATION
Protect from damage all existing vegetation that is to remain,
including damage to the root zone. Do not park vehicles or
equipment, or store heavy materials within the root zone of
trees. Locate all staging areas away from trees. Do not trench
within the dripline of any mature tree without prior approval.
Where necessary, install protective fencing at the dripline
of mature trees. Do not prune existing plants without prior
approval.
SITE MANAGEMENT
Do not store hazardous materials on site. Maintain a clean
site at all times during the project.
IRRIGATION
Do not allow any irrigation within at least 8 feet of the
trunk of any native oak tree. Do not allow any irrigation
system to overspray planted areas or to generate significant
spray drift or runoff. Include in all bids two follow-up visits
to reprogram controller/s and modify watering schedule as
required by maturing plantings and seasonal changes.
NOISE CONTROL
Minimize use of power equipment. Operate noisy equipment within
community guidelines as to hours of operation. No radios are
allowed on any jobsite.
DUST CONTROL
Blowers are not to be used unless approved in advance. Practice
approved standard dust control techniques during grading and
earth-moving operations. Operate off-road equipment at slow
speeds to avoid raising dust.
AIR POLLUTION
Minimize the use of diesel or gasoline-driven power equipment
(chainsaws, tillers, weedeaters, etc.). Do not disable any
required emission control devices on power equipment or vehicles.
Use electric or hand tools where it is not cost-prohibitive.
Do not use any product containing volatile organic compounds
(pesticides, oil-based paints, other petroleum-based products)
without prior approval.
WORKERS
RIGHTS
Comply fully with all legally-required fair employment practices,
including OSHA standards, federal anti-discrimination laws
and all federal, state and local employee laws and regulations.
Provide a workplace that is safe for workers, clients and
others. Pay all workers a living wage.
|